|
IM Profile | ||||||||||
PREV NEXT | FRAMES NO FRAMES |
Packages that use com.siemens.icm.io | |
com.siemens.icm.io | Siemens IMP utility classes for accessing the functionality of a wireless module. |
Classes in com.siemens.icm.io used by com.siemens.icm.io | |
ATCommandFailedException
Signals that a requested device access via the ATCommand class failed. |
|
ATCommandListener
The ATCommandListener interface defines the capabilities for receiving unsolicited AT-Events (e.g. like "RING") and changes of the relevant incoming interface signals (RING, DCD and DSR). |
|
ATCommandResponseListener
The ATCommandResponseListenerListener interface defines the capabilities for receiving the response of sending an AT command to a module's AT interpreter. |
|
BearerControlListener
The BearerControlListener interface defines the capabilities for receiving bearer (e.g. |
|
CommConnectionControlLinesListener
The CommConnectionControlLinesListener interface defines the capability for receiving state changes of the DTR signal. |
|
InPortListener
The InPortListener interface defines the capabilities for receiving value changes at the input ports of the general purpose IO driver (GPIO). |
|
LimitPulseCounterListener
The LimitPulseCounterListener interface defines the capabilities for receiving the indication of a LimitPulseCounter when it has completed counting its number of pulses. |
|
IM Profile | ||||||||||
PREV NEXT | FRAMES NO FRAMES |